Customize Parameters [06/2020 - 10/2022]

CUSTOMIZE PRE-COLLISION SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.

Customizing with the multi-information display

HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.

Change pre-collision system settings by operating steering pad switch.

SETTINGS

Customize Setting	Description	Default	Setting
PCS	Function that turns the pre-collision system on or off	On	On or Off
Sensitivity	Function that selects the warning sensitivity of the pre-collision system function	Middle	Early, Middle or Late

Customizing with the GTS

Select the setting by referring to the table below.

Others

Tester Display	Description	Default	Setting	ECU
PCS Function ON/OFF State Stored	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 1	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 2	Refer to the table below	Stored	$00:Not Stored,$01:Stored	Forward recognition camera
PCS Warning Timing State Stored 3	Refer to the table below	Not Stored	$00:Not Stored,$01:Stored	Forward recognition camera

MEASUREMENT ITEM

Customize Setting	Description	Setting
PCS Function ON/OFF State Stored	Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off.	Not Stored: Pre-collision system always turns on Stored: Pre-collision system maintains previous setting
PCS Warning Timing State Stored 1	Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 2	Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 3	Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON.	Not Stored: Sensitivity setting is reset to Middle Stored: Sensitivity settings are maintained as previous value