Installation [09/2022 - ]: Procedure
- INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY NOTE:
- If the intake mass air flow meter sub-assembly has been struck or dropped, replace it.
- If reusing the intake mass air flow meter sub-assembly, be sure to inspect the gasket.
- Make sure that the gasket is not cracked or moved out of place when installing the intake mass air flow meter sub-assembly.
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.
Refer to INITIALIZATION [09/2022 - 09/2024] , or refer to INITIALIZATION [09/2024 - ]
- Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.