| Includes: R&I Suspension Crossmember Assembly.
DOES NOT include wheel alignment. | 7.6 | 6.0 | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear,w/Clutch Removed | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| w/Clutch Removed | | 0.2 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.4 | | B |
| Combination Procedure: OUTPUT SEAL: Remove & Replace: |
| Each | | 0.2 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.4 | | C |