DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module "A" Missing Message; DTC U0131-87: Lost Communication with Power Steering Control Module "A" Missing Message; DTC U0137-87: Lost Communication With Trailer Brake Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message; DTC U0198-87: Lost Communication with Telematic Control Module "A" Missing Message; DTC U0233-87: Lost Communication with Side Obstacle Detection Control Module "B" Missing Message; DTC U0269-87: Lost Communication with Image Processing Sensor E Missing Message; DTC U1106-87: Lost Communication with Electric Parking Brake Module Missing Message; DTC U1110-87: Lost Communication with Clearance Sonar Module Missing Message; DTC U1112-87: Lost Communication with Combination Switch Control Module Missing Message [02/2024 - ]: Procedure
- CLEAR DTC
Result:
NEXT
See step 2
- CHECK FOR DTCs
Pre-procedure1
- Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.
Procedure1
- Check for DTCs.
Chassis > Front Recognition Camera > Trouble Codes
Result
Result Proceed to DTCs are not output A DTC is output B Post-procedure1
- None
Result:
A
USE SIMULATION METHOD TO CHECK
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2024 - ]
Result:
B
GO TO CAN COMMUNICATION SYSTEM
- Make sure that the DTC detection conditions are met.