| U0100-87 |
Lost Communication with ECM/PCM "A" Missing Message |
Communication stop occurs between the combination meter assembly and ECM continuously for approximately 3.6 seconds or more. |
- ECM
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0114-87 |
Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message |
Communication stop occurs between the combination meter assembly and 4 wheel drive control ECU continuously for approximately 5 seconds or more. |
- 4 wheel drive control ECU
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0126-87 |
Lost Communication with Steering Angle Sensor Module Missing Message |
Communication stop occurs between the combination meter assembly and steering sensor continuously for approximately 3.6 seconds or more. |
- Steering sensor
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0127-87 |
Lost Communication with Tire Pressure Monitor Module Missing Message |
Communication stop occurs between the combination meter assembly and tire pressure warning ECU and receiver continuously for 5 seconds or more. |
- Tire pressure warning ECU and receiver
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0129-87 |
Lost Communication with Brake System Control Module Missing Message |
Either of the following conditions is met:
- Communication stop occurs between the combination meter assembly and brake actuator assembly (No. 2 skid control ECU) continuously for 1 second or more.
- Communication stop occurs between the combination meter assembly and brake actuator assembly (No. 2 skid control ECU) continuously for approximately 3.6 seconds or more.
|
- Brake actuator assembly (No. 2 skid control ECU)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0131-87 |
Lost Communication with Power Steering Control Module Missing Message |
Communication stop occurs between the combination meter assembly and rack and pinion power steering gear assembly (power steering ECU) continuously for approximately 3.6 seconds or more. |
- Rack and pinion power steering gear assembly (power steering ECU)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0140-87 |
Lost Communication with Body Control Module Missing Message |
Communication stop occurs between the combination meter assembly and main body ECU (multiplex network body ECU) continuously for 5 seconds or more. |
- Main body ECU (multiplex network body ECU)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0151-87 |
Lost Communication with Restraints Control Module Missing Message |
Communication stop occurs between the combination meter assembly and airbag ECU assembly continuously for 5 seconds or more. |
- Airbag ECU assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0163-87 |
Lost Communication with Navigation Control Module Missing Message |
Communication stop occurs between the combination meter assembly and radio and display receiver assembly continuously for 5 seconds or more. |
- Radio and display receiver assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0164-87 |
Lost Communication with HVAC Control Module Missing Message |
Communication stop occurs between the combination meter assembly and air conditioning amplifier assembly continuously for 5 seconds or more. |
- Air conditioning amplifier assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0168-87 |
Lost Communication with Vehicle Security Control Module Missing Message |
Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for 5 seconds or more. |
- Certification ECU (smart key ECU assembly)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0182-87 |
Lost Communication with Lighting Control Module Front Missing Message |
Communication stop occurs between the combination meter assembly and No. 1 headlight ECU sub-assembly LH continuously for 5 seconds or more. |
- No. 1 headlight ECU sub-assembly LH
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0230-87 |
Lost Communication with Rear Gate Module Missing Message |
Communication stop occurs between the combination meter assembly and multiplex network door ECU continuously for 5 seconds or more. |
- Multiplex network door ECU
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0233-87 |
Lost Communication with Side Obstacle Detection Control Module "B" Missing Message |
Communication stop occurs between the combination meter assembly and blind spot monitor sensor RH (B) continuously for 5 seconds or more. |
- Blind spot monitor sensor RH (B)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U023A-87 |
Lost Communication with Image Processing Module "A" Missing Message |
Communication stop occurs between the combination meter assembly and forward recognition camera continuously for 5 seconds or more. |
- Forward recognition camera
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0269-87 |
Lost Communication with Image Processing Sensor E Missing Message |
Communication stop occurs between the combination meter assembly and driver monitor ECU assembly continuously for approximately 3.6 seconds or more. |
- Driver monitor ECU assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U0293-87 |
Lost Communication with Hybrid/EV Powertrain Control Module Missing Message |
Either of the following conditions is met:
- Communication stop occurs between the combination meter assembly and hybrid vehicle control ECU assembly continuously for approximately 3.6 seconds or more.
- Communication stop occurs between the combination meter assembly and hybrid vehicle control ECU assembly continuously for approximately 5 seconds or more.
|
- Hybrid vehicle control ECU assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U1110-87 |
Lost Communication with Clearance Sonar Module Missing Message |
Communication stop occurs between the combination meter assembly and clearance warning ECU assembly continuously for 5 seconds or more. |
- Clearance warning ECU assembly
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U1112-87 |
Lost Communication with Combination Switch Module Missing Message |
Communication stop occurs between the combination meter assembly and steering sensor continuously for 10 seconds or more. |
- Steering sensor
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |
| U1133-87 |
Lost Communication with PMN Module Missing Message |
Communication stop occurs between the combination meter assembly and certification ECU (smart key ECU assembly) continuously for approximately 3.6 seconds or more. |
- Certification ECU (smart key ECU assembly)
- CAN communication system
- Combination meter assembly
|
Combination Meter |
B |