DTC P1610-09: Control Module Processor (Brake Override System Input Signal) Component Failure [02/2024 - ]: Procedure

Pre-procedure1

1. None

   Procedure1

2. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

   Result

   Proceed to
   NEXT

   Post-procedure1

3. Turn the ignition switch off and wait for at least 30 seconds.

Result: 

NEXT 

See step  2

Pre-procedure1

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.

   Procedure1

2. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output	A
   P1610-09 and other DTCs are output	B
   P1610-09 is output	C

   Post-procedure1

3. None

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2024 - ]

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [02/2024 - ] 

Result: 

C 

REPLACE ECM 

Refer to REMOVAL [02/2024 - ]