Caution / Notice / Hint

NOTE:

When checking for DTCs, make sure that the blind spot monitor system is turned on.
If the blind spot monitor sensor is replaced, write the ECU software.
Refer to ECU CONFIGURATION [12/2022 - ]
HINT:
After replacing the blind spot monitor sensor, be sure to adjust the optical axis of the blind spot monitor sensor and delete the vehicle control history (RoB) of each system.
- Driving Adjustment: Refer to DRIVING ADJUSTMENT [12/2022 - ]
- Target Adjustment (Triangle Target): Refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [12/2022 - ]
- ECU data Save / Write: Refer to ECU DATA SAVE/WRITE [12/2022 - ]
Before replacing the main body ECU (multiplex network body ECU), refer to the Service Bulletin.