DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication With Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U115C-87: Lost Communication with ECM/PCM "A" (ch5) Missing Message; DTC U1170-87: Lost Communication With Brake System Control Module(ch2) Missing Message [12/2023 - ]: Procedure

1. Clear the DTCs.

   Powertrain > Stop and Start > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

Pre-procedure1

• Turn the ignition switch off and wait for 30 seconds or more.
• Turn the ignition switch to ON.
• Start the engine.
• Perform a road test.
• Enter the following menus: Powertrain / Stop and Start / Trouble Codes.

• Read the DTCs.

  Powertrain > Stop and Start > Trouble Codes 

  Result

  Result	Proceed to
  U0100-87, U0101-87, U0114-87, U0126-87, U0129-87, U0140-87, U0151-87, U0155-87, U0164-87, U115C-87 or U1170-87 is output	A
  U0100-87, U0101-87, U0114-87, U0126-87, U0129-87, U0140-87, U0151-87, U0155-87, U0164-87, U115C-87 or U1170-87 is not output	B

Post-procedure1

• None.

Result: 

A 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2023 - ] 

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2023 - ]