Caution / Notice / Hint
NOTE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
- When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
HINT:
Forward recognition camera beam axis alignment can be performed by using either One Time Recognition, Driving Adjustment or Camera Axis Adjustment Value Write.
One Time Recognition (w/ Lift kit): Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) (w/ Lift kit) [12/2024 - ]
One Time Recognition (w/o Lift kit): Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) (w/o Lift kit) [12/2024 - ]
Driving Adjustment (w/ Lift kit): Refer to DRIVING ADJUSTMENT (W/ Lift kit) [12/2024 - ]
Driving Adjustment (w/o Lift kit): Refer to DRIVING ADJUSTMENT (W/o Lift kit) [12/2024 - ]
Camera Axis Adjustment Value Write: Refer to CAMERA AXIS ADJUSTMENT VALUE WRITE [12/2024 - ]
- When replacing the forward recognition camera, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [12/2024 - ]
- If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.