DTC P1610-09: Control Module Processor (Brake Override System Input Signal) Component Failure [12/2024 - ]: Procedure

Pre-procedure1

• None

• Clear the DTCs.

  Powertrain > Engine > Clear DTCs 

  Result

  Proceed to
  NEXT

Post-procedure1

• Turn the ignition switch off and wait for at least 30 seconds.

Result: 

NEXT 

See step  2

Pre-procedure1

• Perform a confirmation drive. (Refer to confirmation drive in function description)

• Read the DTCs.

  Powertrain > Engine > Trouble Codes 

  Result

  Result	Proceed to
  DTCs are not output	A
  P1610-09 and other DTCs are output	B
  P1610-09 is output	C

Post-procedure1

• None

Result: 

A 

CHECK FOR INTERMITTENT PROBLEMS 

Refer to CHECK FOR INTERMITTENT PROBLEMS [12/2024 - ]

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2024 - ] 

Result: 

C 

REPLACE ECM 

Refer to REMOVAL [12/2024 - ]