DTC P0606-09: Control Module Processor (Brake Override System Output Signal) Component Failure [12/2024 - ]: Description

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	DTC Output from	Priority	Note
P0606-09	Control Module Processor (Brake Override System Output Signal) Component Failure	Diagnosis condition: When all of the following conditions are completed for approx. 3.5 seconds or longer Accelerator opening 56.542°or more STP signal is turned ON Vehicle speed is over 40 km/h Accelerator opening rate is not abnormal STP is not abnormal Wheel speed is not abnormal Abnormal condition: The accelerator opening command value after correction of the brake override system for control is excessively output more than the accelerator opening command value after correction of the monitoring brake override system Abnormal period: More than 1 second Number of trips: 1 trip Detection method: Constant monitor Sensors/component parts used for detection: Accelerator pedal sensor assembly Stop light switch assembly Speed sensor	ECM	Comes on	Engine	B	SAE: P0606 DTC for Mexico Models: Applies

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

DTC Output from

Priority

Note

P0606-09

Control Module Processor (Brake Override System Output Signal) Component Failure

Diagnosis condition:
When all of the following conditions are completed for approx. 3.5 seconds or longer

Abnormal condition:

The accelerator opening command value after correction of the brake override system for control is excessively output more than the accelerator opening command value after correction of the monitoring brake override system

Abnormal period:

Number of trips:

Detection method:

Sensors/component parts used for detection:

ECM

Comes on

Engine