Removal [12/2024 - ]: Procedure
- REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 2 - REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY NOTE:
- Avoid physical shock to the accelerator pedal sensor assembly.
- If the accelerator pedal sensor assembly has been struck or dropped, replace it.
- Do not disassemble the accelerator pedal sensor assembly.
- The accelerator pedal sensor assembly does not require lubrication.
- Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.