LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> GR86 Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Eyesight System - Diagnostic Codes (2 Of 2) & Symptom Tests >> Eyesight System >> Set Speed cannot be Changed. Current Vehicle Speed cannot be Set. Cannot resume cruise control system. (RES/+, SET/- does not Function) [11/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Set Speed cannot be Changed. Current Vehicle Speed cannot be Set. Cannot resume cruise control system. (RES/+, SET/- does not Function) [11/2021 - ]: Procedure

  1. CHECK EyeSight STEERING SWITCH 
    1. Check the EyeSight steering switch.

      Refer to Check EyeSight Steering Switch [11/2021 - ] 

      Is the check result OK?

      Result Proceed to
      YES A
      NO (Repair or replace the faulty portion according to the inspection result.) B

    Result: 

    REPAIR OR REPLACE THE FAULTY PORTION ACCORDING TO THE INSPECTION RESULT 

    Result: 

    See step  2

  2. CHECK USING CHECK LIST 
    1. Using CHECK LIST (ADAPTIVE CRUISE CONTROL), check the following and respond to it.

      Refer to CHECK LIST [11/2021 - 12/2023] , or refer to CHECK LIST [12/2023 - ]

      • Does it apply to the condition that the adaptive cruise control cannot operate?
      • Does it apply to the condition that the adaptive cruise control is unintentionally canceled?

      Is there a relevant item in the check list?

      Result Proceed to
      YES (When there is a relevant item, it can be the cause of malfunction. Eliminate the cause, and check that the malfunction has been improved.) A
      NO B

    Result: 

    WHEN THERE IS A RELEVANT ITEM, IT CAN BE THE CAUSE OF MALFUNCTION. 

    ELIMINATE THE CAUSE, AND CHECK THAT THE MALFUNCTION HAS BEEN IMPROVED.

    Result: 

    See step  3

  3. PERFORM REAL TIME DIAGNOSIS 
    1. Check the input signal of cruise control system.

      Refer to DIAGNOSIS SYSTEM [11/2021 - 12/2023] , or refer to DIAGNOSIS SYSTEM [12/2023 - ]

      Is the check result OK?

      Result Proceed to
      YES A
      NO (When the operation and the indication do not match, check applicable items.) B

    Result: 

    WHEN THE OPERATION AND THE INDICATION DO NOT MATCH, CHECK APPLICABLE ITEMS 

    Result: 

    See step  4

  4. CHECK FOR PRESENCE OF CANCEL CODE 
    1. Check for presence of adaptive cruise control cancel codes.

      Refer to CANCEL CODE [11/2021 - 12/2023] , or refer to CANCEL CODE [12/2023 - ]

      Is a cancel code displayed?

      Result Proceed to
      YES (The cruise control is canceled due to the displayed cancel code content. System is normal.) A
      NO B

    Result: 

    THE CRUISE CONTROL IS CANCELED DUE TO THE DISPLAYED CANCEL CODE CONTENT. SYSTEM IS NORMAL. 

    Result: 

    See step  5

  5. CHECK FOR PRESENCE OF CANCEL CODE 
    1. Check for the presence of ECM cancel codes.

      Refer to CANCEL CODE [11/2021 - 12/2023] , or refer to CANCEL CODE [12/2023 - ]

      Is a cancel code displayed?

      Result Proceed to
      YES (Perform the diagnosis for the displayed cancel code.) A
      NO (It is possible that the cancel code is deleted. Therefore, reproduce the failure, and then perform the diagnosis again.) B

    Result: 

    PERFORM THE DIAGNOSIS FOR THE DISPLAYED CANCEL CODE 

    Refer to CANCEL CODE [11/2021 - 12/2023] , or refer to CANCEL CODE [12/2023 - ]

    Result: 

    IT IS POSSIBLE THAT THE CANCEL CODE IS DELETED. THEREFORE, REPRODUCE THE FAILURE, AND THEN PERFORM THE DIAGNOSIS AGAIN.