Distance Setting cannot be Changed. Switching to Constant Speed mode is not Possible. (Following Distance Setting Switch does not Function.) [11/2021 - ]: Procedure

1. Check the EyeSight steering switch.

   Refer to Check EyeSight Steering Switch [11/2021 - ] 

   Is the check result OK?

   Result	Proceed to
   YES (The circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.) HINT:  In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.	A
   NO (Repair or replace the faulty portion according to the inspection result.)	B

Result: 

A 

THE CIRCUIT HAS RETURNED TO A NORMAL CONDITION AT THIS TIME. REPRODUCE THE FAILURE, AND THEN PERFORM THE DIAGNOSIS AGAIN 

Result: 

B 

REPAIR OR REPLACE THE FAULTY PORTION ACCORDING TO THE INSPECTION RESULT