| U0074 |
Control Module Communication Bus "BODY-CAN" Off |
When bus off is detected 6 times in a row by CAN function complying with ISO 11898. |
| U0100 |
Lost Communication With ECM/PCM "A" |
When reception ID frame is not normally and continuously received for 10 seconds, with ignition switch ON. (Including when frame is abandoned by DLC (data length code) check error) |
| U0101 |
Lost Communication With TCM |
When reception ID frame is not normally and continuously received for 10 seconds, with ignition switch ON. (Including when frame is abandoned by DLC (data length code) check error) |
| U0122 |
Lost Communication With Vehicle Dynamics Control Module |
When reception ID frame is not normally and continuously received for 10 seconds, with ignition switch ON. (Including when frame is abandoned by DLC (data length code) check error) |
| U0155 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module |
When reception ID frame is not normally and continuously received for 10 seconds during CAN bus Wake-up. (Including when frame is abandoned by DLC (data length code) check error) |
| U0401 |
Invalid Data Received From ECM/PCM "A" |
When the following conditions are all established.
- Data no-receive DTC of monitored node is not in current malfunction.
- Fail detection counter of monitored node is not updated 32 times in a row. Or checksum error is detected 3 times in a row.
|
| U0416 |
Invalid Data Received From Vehicle Dynamics Control Module |
When the following conditions are all established.
- Data no-receive DTC of monitored node is not in current malfunction.
- Fail detection counter of monitored node is not updated 32 times in a row. Or checksum error is detected 3 times in a row.
|
| U0423 |
Invalid Data Received From Instrument Panel Cluster Control Module |
When the following conditions are all established.
- Data no-receive DTC of monitored node is not in current malfunction.
- Fail detection counter of monitored node is not updated 32 times in a row. Or checksum error is detected 3 times in a row.
|
| U1140 |
Lost Communication With Body Control Module BODY-CAN |
When reception ID frame is not normally and continuously received for 10 seconds during CAN bus Wake-up. (Including when frame is abandoned by DLC (data length code) check error) |
| U1198 |
Lost Communication with Telematics System |
When reception ID frame is not normally and continuously received for 10 seconds during CAN bus Wake-up. (Including when frame is abandoned by DLC (data length code) check error) |
| U1422 |
Invalid Data Received From Body Control Module BODY-CAN |
When the following conditions are all established.
- Data no-receive DTC of monitored node is not in current malfunction.
- Fail detection counter of monitored node is not updated 32 times in a row.
|