On-Vehicle Inspection [11/2021 - ]: Procedure

HINT: 

Individual difference of the accelerator pedal may not be corrected sufficiently on the ECM side after the memory was cleared or the battery was removed and installed on the vehicle. Therefore, when the Accel. Opening Angle does not indicate [100%], repeat the ignition switch to ON (engine OFF) and ignition switch off operations at intervals of 3 seconds or more, until the Accel. Opening Angle indicates [100%].

1. Turn the ignition switch to ON.
2. Read the Accel. Opening Angle and the accelerator sensor voltage using GTS.

   Powertrain > Engine Control System > Data List 

   Tester Display
   Accel. Opening Angle
   Main-Accelerator Sensor
   Sub-Accelerator Sensor

   Specified Condition

   Tester Display	Accel. Opening Angle	Specified Condition
   Main-Accelerator Sensor	0.0%	0.3 to 1.1 V
   	100.0%	2.3 to 3.8 V
   Sub-Accelerator Sensor	0.0%	0.3 to 1.1 V
   	100.0%	2.3 to 3.8 V