LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> GR86 Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Accelerator Pedal >> Removal [11/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [11/2021 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    Refer to PROCEDURE - Step 1
  2. REMOVE ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY 
    1. GTY1049714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ACCELERATOR PEDAL ROD STOPPER 
    1. GTY1047425Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the accelerator pedal rod stopper.

        HINT: 

        Pulling out the accelerator pedal rod stopper may damage the inside. Remove it by rotating it counterclockwise.

  4. REMOVE ACCELERATOR PEDAL ROD COVER 
    1. GTY1046580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals