DTC P3011-00: Hybrid/EV Battery Block 1 Circuit Resistance Out of Range (Extreme); DTC P3011-1E: Hybrid/EV Battery Block 1 Circuit Resistance Out of Range; DTC P3012-00: Hybrid/EV Battery Block 2 Circuit Resistance Out of Range (Extreme); DTC P3012-1E: Hybrid/EV Battery Block 2 Circuit Resistance Out of Range; DTC P3013-00: Hybrid/EV Battery Block 3 Circuit Resistance Out of Range (Extreme); DTC P3013-1E: Hybrid/EV Battery Block 3 Circuit Resistance Out of Range; DTC P3014-00: Hybrid/EV Battery Block 4 Circuit Resistance Out of Range (Extreme); DTC P3014-1E: Hybrid/EV Battery Block 4 Circuit Resistance Out of Range; DTC P3015-00: Hybrid/EV Battery Block 5 Circuit Resistance Out of Range (Extreme); DTC P3015-1E: Hybrid/EV Battery Block 5 Circuit Resistance Out of Range; DTC P3016-00: Hybrid/EV Battery Block 6 Circuit Resistance Out of Range (Extreme); DTC P3016-1E: Hybrid/EV Battery Block 6 Circuit Resistance Out of Range; DTC P3017-00: Hybrid/EV Battery Block 7 Circuit Resistance Out of Range (Extreme); DTC P3017-1E: Hybrid/EV Battery Block 7 Circuit Resistance Out of Range; DTC P3018-00: Hybrid/EV Battery Block 8 Circuit Resistance Out of Range (Extreme); DTC P3018-1E: Hybrid/EV Battery Block 8 Circuit Resistance Out of Range; DTC P3019-00: Hybrid/EV Battery Block 9 Circuit Resistance Out of Range (Extreme); DTC P3019-1E: Hybrid/EV Battery Block 9 Circuit Resistance Out of Range; DTC P3020-00: Hybrid/EV Battery Block 10 Circuit Resistance Out of Range (Extreme); DTC P3020-1E: Hybrid/EV Battery Block 10 Circuit Resistance Out of Range; DTC P3021-00: Hybrid/EV Battery Block 11 Circuit Resistance Out of Range (Extreme); DTC P3021-1E: Hybrid/EV Battery Block 11 Circuit Resistance Out of Range; DTC P3022-00: Hybrid/EV Battery Block 12 Circuit Resistance Out of Range (Extreme); DTC P3022-1E: Hybrid/EV Battery Block 12 Circuit Resistance Out of Range [02/2024 - ]: Procedure
- CHECK DTC OUTPUT (HYBRID CONTROL)
Pre-procedure1
- None.
Procedure1
- Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
Result Proceed to "P0AFC-00, P0AFC-96, P308A-12 or P0AFC-62" is not output. A "P0AFC-00, P0AFC-96, P308A-12 or P0AFC-62" is also output. B Post-procedure1
- Turn the ignition switch off.
Result:
B
GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to DIAGNOSTIC TROUBLE CODE CHART [02/2024 - ]
Result:
A
See step 2
- None.
- CHECK FREEZE FRAME DATA (HYBRID CONTROL)
Refer to PROCEDURE - Step 2
Result
Result Proceed to On the HV battery blocks 3 to 10, one of the conditions in the table above is met. A Other than above B Result:
B
See step 5
Result:
A
See step 3
- CHECK TOTAL DISTANCE DRIVEN
- Read the odometer to check the total distance the vehicle has been driven.
Result
Result Proceed to Total distance driven is less than 200000 km (124280 mile) A Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1 Other than above B HINT:
*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.
Result:
A
REPLACE HV SUPPLY BATTERY ASSEMBLY
Refer to REMOVAL [02/2024 - ]
Result:
B
See step 4
- Read the odometer to check the total distance the vehicle has been driven.
- REPLACE HV SUPPLY BATTERY ASSEMBLY
HINT:
Refer to REMOVAL [02/2024 - ]
Result
Proceed to NEXT Result:
NEXT
REPLACE HYBRID BATTERY TERMINAL BLOCK
Refer to REMOVAL [02/2024 - ]
- CHECK FREEZE FRAME DATA (HYBRID CONTROL)
Refer to PROCEDURE - Step 5
Result
Result Proceed to Either of the following conditions is met:
1. All conditions in table 1 are met.
2. All conditions in table 2 are met.A Other than above B Result:
A
REPLACE BATTERY VOLTAGE SENSOR
Refer to REMOVAL [02/2024 - ]
Result:
B
See step 6
- READ VALUE USING GTS (HYBRID/EV BATTERY BLOCK VOLTAGE)
Refer to PROCEDURE - Step 6
Result
Result Proceed to All conditions in Table 1, Table 2 or Table 3 are met. A Other than above B Result:
A
REPLACE BATTERY VOLTAGE SENSOR
Refer to REMOVAL [02/2024 - ]
Result:
B
See step 7
- CHECK DTC OUTPUT (HYBRID CONTROL)
Pre-procedure1
- None.
Procedure1
- Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
Result Proceed to P1BF0-1E, P3022-00 or P3022-1E is not output. A P1BF0-1E, P3022-00 or P3022-1E is output. B Post-procedure1
- Turn the ignition switch off.
Result:
B
See step 10
Result:
A
See step 8
- None.
- CHECK TOTAL DISTANCE DRIVEN
- Read the odometer to check the total distance the vehicle has been driven.
Result
Result Proceed to Total distance driven is less than 200000 km (124280 mile) A Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1 Other than above B HINT:
*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.
Result:
A
REPLACE HV SUPPLY BATTERY ASSEMBLY
Refer to REMOVAL [02/2024 - ]
Result:
B
See step 9
- Read the odometer to check the total distance the vehicle has been driven.
- REPLACE HV SUPPLY BATTERY ASSEMBLY
HINT:
Refer to REMOVAL [02/2024 - ]
Result
Proceed to NEXT Result:
NEXT
REPLACE HYBRID BATTERY TERMINAL BLOCK
Refer to REMOVAL [02/2024 - ]
- REPLACE HV SUPPLY BATTERY ASSEMBLY
HINT:
Refer to REMOVAL [02/2024 - ]
Result
Proceed to NEXT Result:
NEXT
REPLACE HYBRID BATTERY TERMINAL BLOCK
Refer to REMOVAL [02/2024 - ]