DTC U0163-87: Lost Communication with Navigation Control Module Missing Message [12/2022 - 03/2023]: Procedure

HINT: 

This utility is used to initialize the navigation installation information stored in the front recognition camera.

1. Following the instructions on the GTS, perform "Navigation Installation Information Initialization".

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Navigation Installation Information Initialization

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Clear the DTCs.

   Chassis > Front Recognition Camera > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

Pre-procedure1

• Make sure that the DTC detection conditions are met.

  HINT: 

  If the detection conditions are not met, the system cannot detect the malfunction.

• Check for DTCs.

  Chassis > Front Recognition Camera > Trouble Codes 

  Result

  Result	Proceed to
  DTCs are not output	A
  U0163-87 is output	B

Post-procedure1

• None

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2022 - ] 

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2022 - ]