DTC U130D-57: Instrument Panel Cluster (IPC) Control Module Invalid / Incompatible Software Component [12/2022 - ]: Procedure

1. Clear the DTCs.

   Chassis > Front Recognition Camera > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

Pre-procedure1

• Make sure that the DTC detection conditions are met.

  HINT: 

  If the detection conditions are not met, the system cannot detect the malfunction.

• Check for DTCs.

  Chassis > Front Recognition Camera > Trouble Codes 

  Result

  Result	Proceed to
  U130D-57 is not output	A
  U130D-57 is output	B

Post-procedure1

• None

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2022 - ] 

Result: 

B 

See step  3

HINT: 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2022 - 03/2023] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2023 - ]

Result

Result: 

OK 

REPLACE FORWARD RECOGNITION CAMERA. Refer to  REMOVAL [12/2022 - 03/2023]  , or refer to  REMOVAL [03/2023 - ] 

Result: 

NG 

GO TO METER / GAUGE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2022 - 03/2023]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [03/2023 - ]