DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0103-87: Lost Communication with Gear Shift Control Module "A" Missing Message; DTC U0110-87: Lost Communication with Drive Motor Control Module "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0131-87: Lost Communication With Power Steering Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-00: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U1107-87: Lost Communication with Power Management Module Missing Message; DTC U111A-87: Lost Communication with ECM/PCM "A" (ch2) Missing Message; DTC U1154-87: Lost Communication with Drive Motor Control Module "A" (ch2) Missing Message; DTC U1170-87: Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message; DTC U117B-87: Lost Communication with Hybrid/EV Battery Energy Control Module "A" (ch2) Missing Message [12/2022 - ]: Procedure
- CHECK DTC OUTPUT (HEALTH CHECK)
Pre-procedure1
- According to the display on the GTS, select "Health Check".
Procedure1
- Check for DTCs.
Result
Result Proceed to Hybrid vehicle control ECU outputs P2530-12. A Hybrid vehicle control ECU does not output P2530-12. B Post-procedure1
- Turn the ignition switch off.
Result:
A
GO TO DTC CHART (P2530-12)
Refer to DTC P2530-12: IG2 Signal Circuit Short to Auxiliary Battery [12/2022 - ]
Result:
B
GO TO CAN COMMUNICATION SYSTEM
- According to the display on the GTS, select "Health Check".