Confirmation Driving Pattern

HINT: 

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the All Readiness check procedure.

Refer to UTILITY [12/2022 - ]

1. Turn the ignition switch to ON (READY).
2. With the brake pedal depressed, change the shift state from R to D.
3. Drive the vehicle at a speed of 40 km/h (25 mph) or more for 10 seconds or more.
4. Stop the vehicle, and with the brake pedal depressed, change the shift state from B to N.
5. Press the P position switch to change the shift state to P.