Caution / Notice / Hint
NOTE:
- When removing or installing the shift control ECU and shift actuator ECU, make sure there is no power supplied*1 when disconnecting or connecting the connectors.
*1: Auxiliary battery, sub-battery, integrated capacitor, etc.
- When disconnecting a wire harness of any component connected to the supply power of the integrated capacitor or when removing the integrated capacitor, make sure to wait 5 minutes or more after turning the ignition switch off for self-diagnosis to complete and the voltage of the integrated capacitor to discharge.
- Before performing troubleshooting, check the fuses, connector connections and contact pressure of the relevant terminals for this circuit.