Installation [06/2020 - ]: Procedure
- INSTALL NO. 2 ECM BRACKET
- Install the No. 2 ECM bracket to the ECM with the 2 screws.
Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf)
- Install the No. 2 ECM bracket to the ECM with the 2 screws.
- INSTALL NO. 1 ECM BRACKET
- Install the No. 1 ECM bracket to the ECM with the 2 screws.
Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf)
- Install the No. 1 ECM bracket to the ECM with the 2 screws.
- INSTALL ECM
- Install the ECM with the 2 nuts and bolt.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)
- Install the bolt and attach the clamp.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Connect the 2 connectors to the ECM and push down the lever to lock it.NOTE:
- When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
- Be sure to securely connect the ECM connectors.
- Install the ECM with the 2 nuts and bolt.
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to INSTALLATION [06/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]
- WRITE VIN
Refer to REGISTRATION [06/2020 - ]
HINT:
It requires when replacing the ECM.
- UPDATE ECU SECURITY KEY
Refer to UPDATE ECU SECURITY KEY [06/2020 - ]
HINT:
It requires when replacing the ECM.
- WORK PROCEDURE AFTER BATTERY RECONNECTED
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Refer to AUTOMATIC LEARNING CHART [06/2020 - 12/2021] , or refer to AUTOMATIC LEARNING CHART [12/2021 - ]