LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid XSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Lin Communication System - Diagnostics - Introduction) >> Lin Communication System >> DTC Check / Clear [10/2023 - 11/2024] >> DTC Check / Clear [10/2023 - 11/2024]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [10/2023 - 11/2024]

WARNING: This page is about a different variant/trim than selected.
NOTE:

The different types of main body ECU (multiplex network ECU) are shown in the "PRECAUTION".

Refer to PRECAUTION [10/2023 - 11/2024] 

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body or Smart Key / Trouble Codes.

      Body Electrical > Smart Key > Trouble Codes 

      for Type A:

      Body Electrical > Main Body > Trouble Codes 

      for Type B:

      Body Electrical > Main Body > Trouble Codes 

    5. Check the details of the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - 11/2024] 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body or Smart Key / Trouble Codes.

      Body Electrical > Smart Key > Clear DTCs 

      for Type A:

      Body Electrical > Main Body > Clear DTCs 

      for Type B:

      Body Electrical > Main Body > Clear DTCs 

    5. Clear the DTCs.