LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid XSE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Power Window Control System - Diagnostics - Introduction) >> Power Window Control System >> Utility [11/2018 - ] >> Utility [11/2018 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Utility [11/2018 - ]

WARNING: This page is about a different variant/trim than selected.
  1. CLEAR WINDOW POSITION DATA 
    NOTE:

    If "Reset Memory" is performed, DTC B2313 will be output.

    1. Turn the ignition switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / (desired system) / Utility / Reset Memory.
    6. Select the "Reset Memory" to clear the window position data using the Techstream.

      Body Electrical > D-Door Motor > Utility 

      Tester Display
      Reset Memory

      Body Electrical > P-Door Motor > Utility 

      Tester Display
      Reset Memory

      Body Electrical > RL-Door Motor > Utility 

      Tester Display
      Reset Memory

      Body Electrical > RL-Door Motor > Utility 

      Tester Display
      Reset Memory
scientia non olet · About LEMON Manuals