April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [11/2018 - ]

WARNING: This page is about a different variant/trim than selected.

DTC CHECK
1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON, and wait for at least 10 seconds.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / Occupant Detection and SRS Airbag / Trouble Codes.
  Body Electrical > Occupant Detection > Trouble Codes
  
  Body Electrical > SRS Airbag > Trouble Codes
6. Check for DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's Service Information for further details.
DTC CLEAR
1. Turn the ignition switch off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON, and wait for at least 10 seconds.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / Occupant Detection and SRS Airbag / Clear DTCs.
  Body Electrical > Occupant Detection > Clear DTCs
  
  Body Electrical > SRS Airbag > Clear DTCs
6. Clear the DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's Service Information for further details.