LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2025 >> Supra Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (B58) - Service Information >> Mass Air Flow Meter >> Installation [03/2019 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [03/2019 - ]: Procedure

  1. INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Insert and install the intake mass air flow meter sub-assembly (2).
      GTY946187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Tighten T20 screws (arrows).

      Torque: 1.4 N*m (14 kgf*cm, 12 in.*lbf) 

    3. Connect connectors (1) and lock.

      HINT: 

      The connector (1) must engage audibly.

  2. PERFORM INITIALIZATION 
    1. Connect the diagnosis system to the vehicle and enter the following menus:

      Vehicle management / Service functions / Drive / Engine electronics / Reset adaptations / ABL Reset adaptation values

scientia non olet · About LEMON Manuals