Installation [03/2019 - ]: Procedure

1. Replace the throttle body gasket (1).

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Position throttle body with motor assembly.
3. Connect connectors and lock.

   HINT: 

   The connector must engage audibly.

4. Install throttle body with motor assembly.
5. Tighten down bolts (2).

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

6. Tighten down E10 bolt (1).

   Torque: 11.8 N*m (120 kgf*cm, 9 ft.*lbf) 

Refer to INSTALLATION [03/2019 - ]