DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0114-87: Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication With Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0155-87: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U115C-87: Lost Communication with ECM/PCM "A" (ch5) Missing Message; DTC U1170-87: Lost Communication With Brake System Control Module(ch2) Missing Message [12/2023 - ]: Description
The engine stop and start ECU communicates with the engine control system, automatic transmission system, transfer system, electronically control brake system, power steering system, air conditioning system, airbag system, adaptive variable suspension system, combination meter assembly, main body ECU (multiplex network body ECU), parking support brake system and integration control and panel sub-assembly via CAN communication.
If there is a communication error between the engine stop and start ECU and any of the systems, the engine stop and start ECU stores DTCs and illuminates the stop and start cancel indicator except when there is a communication error with the meter/gauge system.
HINT:
- When there is an open in the output side of the backup boost converter (built into the engine stop and start ECU), power to the system with the open is cut off. The engine stop and start ECU stores CAN communication DTCs for the system with the open stop and start system vehicle control history code X087A.
- When the backup boost converter (built into the engine stop and start ECU) detects overcurrent in any of the circuits it supplies power to, it shuts off the circuit. The engine stop and start ECU stores CAN communication DTCs for the system which circuit was shut off and stores stop and start system vehicle control history code X087A.
e.g.: When the backup boost converter (built into the engine stop and start ECU) detects overcurrent in the power source circuit of the skid control ECU (brake actuator assembly) and cuts off power supply, the engine stop and start ECU stores DTCs U0129-87 and vehicle control history code X087A.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| U0100-87 | Lost Communication With ECM/PCM "A" Missing Message | No communication between the engine stop and start ECU and ECM for 1 second. |
|
Comes on (for Mexico Models: Does not come on) |
Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0100 |
| U0101-87 | Lost Communication with TCM Missing Message | No communication between the engine stop and start ECU and TCM for 1 second. |
|
Comes on (for Mexico Models: Does not come on) |
Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0101 |
| U0114-87 | Lost Communication with Four-Wheel Drive Clutch Control Module Missing Message | No communication between the engine stop and start ECU and 4 wheel drive control ECU for 10 seconds. |
|
Comes on (for Mexico Models: Does not come on) |
Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0114 |
| U0126-87 | Lost Communication with Steering Angle Sensor Module Missing Message | No communication between the engine stop and start ECU and steering sensor for 3 second. |
|
Does not come on | Does not come on | Stop and Start | B | SAE Code: U0126 |
| U0129-87 | Lost Communication With Brake System Control Module Missing Message | No communication between the engine stop and start ECU and skid control ECU (brake actuator assembly) for 2.22 seconds. |
|
Comes on (for Mexico Models: Does not come on) |
Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0129 |
| U0140-87 | Lost Communication with Body Control Module Missing Message | No communication between the engine stop and start ECU and the main body ECU (multiplex network body ECU) for 3.6 seconds. |
|
Does not come on | Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0140 |
| U0151-87 | Lost Communication with Restraints Control Module Missing Message | No communication between the engine stop and start ECU and airbag ECU assembly for 10.6 seconds. |
|
Does not come on | Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0151 |
| U0155-87 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | No communication between the engine stop and start ECU and the combination meter assembly for 3.6 seconds. |
|
Does not come on | Blinks | Stop and Start | B | SAE Code: U0155 |
| U0164-87 | Lost Communication with HVAC Control Module Missing Message | No communication between the engine stop and start ECU and air conditioning amplifier assembly for 10.6 seconds. |
|
Does not come on | Does not come on (for Mexico Models: Blinks) |
Stop and Start | B | SAE Code: U0164 |
| U115C-87 | Lost Communication with ECM/PCM "A" (ch5) Missing Message | No communication between the engine stop and start ECU and ECM for 10.6 seconds. |
|
Comes on | Does not come on | Stop and Start | B | SAE Code: U115C |
| U1170-87 | Lost Communication With Brake System Control Module(ch2) Missing Message | No communication between the engine stop and start ECU and the skid control ECU (brake actuator assembly) for 2.22 seconds. |
|
Does not come on | Blinks | Stop and Start | B | SAE Code: U1170 |