Wheel Alignment Specifications

NOTE: Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY & OPERATION article in the WHEEL ALIGNMENT section.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Preferred

Range

Corrado

Camber ⁽¹⁾

Front

-21/32

-1 To -5/16

Rear

-1/2

-1 21/32 To -1 11/32

Caster ⁽¹⁾

1 19/32

1 3/32 To 2 3/32

Toe-In ⁽²⁾

Front

0 (0)

-3/32 To 3/32 (-2.5 To 2.5)

Rear

5/32 (4)

1/16 To 1/4 (1.5 To 6.5)

Toe-In ⁽¹⁾

Front

-5/32 To 5/32

Rear

11/32

3/16 To 1/2

Fox (Except Wagon)

Camber ⁽¹⁾

Front

-1/2

-13/16 To -3/16

Rear

-1 1/2

-2 To -1

Caster ⁽¹⁾

1 11/16 To 2 5/16

Toe-In ⁽²⁾

Front

-1/16 (-1.5)

-1/8 To 0 (-3 To 0)

Rear

7/32 (5.5)

1/8 To 9/32 (3 To 7)

Toe-In ⁽¹⁾

Front

-1/8

-1/4 To 0

Rear

7/16

1/4 To 9/16

Fox Wagon

Camber ⁽¹⁾

Front

-1/2

-13/16 To 3/16

Rear

-1 1/2

-2 To 1

Caster ⁽¹⁾

1 3/4

1 7/16 To 2 1/16

Toe-In ⁽²⁾

Front

-1/16 (-1.5)

-1/8 To 0 (-3 To 0)

Rear

5/32 (4)

1/16 To 1/4 (1.5 To 6.5)

Toe-In ⁽¹⁾

Front

-1/8

-1/4 To 0

Rear

5/16

1/8 To 1/2

Passat

Camber ⁽¹⁾

Front

-1 11/32

-1 11/16 To -1

Rear

-1 21/32

-2 To -1 5/16

Caster ⁽¹⁾

1 21/32

1 5/32 To 2 5/32

Toe-In ⁽²⁾

Front

0 (0)

-3/32 To 3/32 (-2.5 To 2.5)

Rear

7/32 (5.5)

3/32 To 11/32 (2.5 To 8.5)

Toe-In ⁽¹⁾

Front

-5/32 To 5/32

Rear

13/32

5/32 To 21/32

Toe-Out On Turns ⁽¹⁾

N/A

⁽¹⁾	Measurement is in degrees.

⁽²⁾	Measurement is in inches (mm).