Evaluating display group 10, display zone 2 - Engine load

EVALUATING DISPLAY GROUP 10, DISPLAY ZONE 2

Appears on display	Possible cause	Corrective action
Less than specified	Lower values can only occur when driving in overrun	---
Greater than specified	Rough idling (not running on all cylinders)	Check spark connectors. See TEST DATA, SPARK PLUGS . Check ignition coils with power output stage. See IGNITION COIL WITH POWER OUTPUT STAGE, CHECKING .
	Mass Air Flow (MAF) Sensor -G70- faulty	Check Mass Air Flow (MAF) Sensor -G70-. See MASS AIR FLOW (MAF) SENSOR -G70-, CHECKING .
	Fuel injector faulty	Check fuel injectors. See FUEL INJECTORS, CHECKING .
	Throttle Valve Control Module -J338- sticking/faulty	Check Throttle Valve Control Module -J338-. See THROTTLE VALVE CONTROL MODULE -J338-, CHECKING .
	Electric consumers switched on	Switch off electric consumers
	Steering wheel at full lock	Set steering wheel to center position
	Gear selected (automatic transmission)	Place selector lever in P or N