TIPTRONIC Switch Signal Magnet: Notes
Two signal magnets -A and B- are installed in the cover strip -1-. These magnets transfer the selector lever position signals to the circuit board above.
CAUTION:
When installing, the magnet -A- may stick to metallic objects (tools, for example). If it does, it must be reinserted in the correct position.
A magnet that is installed incorrectly or is missing leads to shift mechanism malfunctions.
-- When installing a new cover strip, check to make sure the magnet -A- is present and is installed correctly. Refer to MAGNET INSTALLED POSITION, CHECKING .
Replace the cover strip if the magnet is lost.