LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2015 >> Jetta Base >> Repair and Diagnosis (Single Page) >> Maintenance >> Procedures >> Maintenance System (General Information) >> Maintenance >> Procedure Descriptions >> Service Interval Display, Resetting And Coding >> Service Interval Display, Resetting Without Vehicle Diagnosis Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Interval Display, Resetting Without Vehicle Diagnosis Tester

Resetting the Oil Change Service 

Using the buttons in the instrument cluster.

-- With the ignition turned off, press the -3- button and hold it pressed.

GWWN01-10704Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

-- With the ignition turned off, press the -3- button and hold it pressed.

GWWN01-10704Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

GWWN01-10635Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or by pressing the button -5- in the multifunction steering wheel to confirm.

GWWN01-10703Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

Resetting the Inspection Service

Using the buttons in the instrument cluster.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

GWWN01-10704Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release the button -3- and press the button -1- within 20 seconds.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.

-- Turn off the ignition.

-- Emergency flasher switched on.

-- Press and hold the button -3-.

GWWN01-10704Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Switch on the ignition.

-- Release button -3-.

The confirmation request appears in the instrument cluster display.

-- By pressing the button -1- in the windshield wiper lever

GWWN01-10635Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- or by pressing the button -5- in the multifunction steering wheel to confirm.

GWWN01-10703Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn off the emergency flasher.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.