Adaptive Cruise Control Module, Removing And Installing, From Retaining Plate: Installing
Install in the reverse order of removal. Note the following:
Replace the quick-release fasteners -2-.
The adjusting screws -1- in the adapter frame are preset. If necessary, correct the setting. Refer to Fig 1.
Adjusting Screw Adjusting
-- Using the :VAS6335 measure the adjustment dimension -a- on all adjusting screws and adjust if necessary.
- Dimension -a- = 40.3 mm ± 0.5 mm
-- Push in new quick-release fasteners -2- on the adjusting screws and fixed bearing on the adapter frame -3-.
-- Install the retaining plate -1- on the quick-release fasteners -2-.
-- Turn the quick-release fasteners -2- on the back of the retaining plate -1- in the direction of -arrow A- until stop.
-- Install the Distance Regulation Control Module -J428-. Refer to ADAPTIVE CRUISE CONTROL MODULE, REMOVING AND INSTALLING, WITH RETAINING PLATE .
-- Calibrate the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL, CALIBRATING .