3.2.1 Adaptive Cruise Control Module, Removing And Installing, With Retaining Plate

Special Tools And Workshop Equipment Required 

• Torque Wrench 1410 - VAG1410-

Removing 

• Remove the bolts -1-.
• Remove the Distance Regulation Control Module - J428- with retaining plate -3-.
• Disconnect the connector -2-.

Installing 

Install in the reverse order of removal. Note the following:

• Calibrate the adaptive cruise control. Refer to 3.3 Adaptive Cruise Control, Calibrating 

Tightening Specifications 

• Refer to 3.1 Overview - Adaptive Cruise Control