April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Module for Adaptive Cruise Control, Removing and Installing at the Retaining Plate, Version 1: Installing

Install in reverse order of removal and note the following:

G12354128

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Replace the quick-release fasteners -2-.
The adjusting screws -1- in the Distance Regulation Control Module - J428- are pre-set. If necessary, correct the setting. Refer to Control Module for Adaptive Cruise Control, Removing and Installing .
If the adjusting s screws -1- were removed, the clips on the Distance Regulation Control Module - J428- must be replaced. .

Press the new quick-release fasteners -4- on the adjusting screws -2-.
Attach the retaining plate -3- to the Distance Regulation Control Module - J428- -1-.
Secure the quick-release fasteners -4- to the retaining plate -3- in the direction of the -arrow- all the way.
Install the Distance Regulation Control Module - J428-. Refer to Control Module for Adaptive Cruise Control, Removing and Installing