Coolant Level, Checking And Adding Coolant Additive
-- Check the coolant level in the reservoir when the engine is cold.
- Pre-delivery inspection: coolant level minimum to the mark "MAX marking".
- At the pre-delivery inspection a coolant level above the mark "MAX marking" is permitted.
- Extracting the increased coolant level is not necessary because the coolant level can be lowered on new vehicles through the venting process.
- Inspection service or inspection: coolant level above the "MIN mark".
-- If coolant level is too low, add the missing amount according to the mixture ratio.
NOTE:
Determine cause of fluid loss, which cannot be attributed to normal use and repair (repair procedure).