4.1 Driver Assistance Systems Front Camera, Removing And Installing

Removing 

• Turn off the ignition and all electrical equipment.
• Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
• Remove the cover -1-. Refer to Body Interior (Interior Rearview Mirror; Interior Rearview Mirror, Removing and Installing).
• Unclip the Driver Assistance Systems Front Camera - R242- -2- in the direction of -arrow A- from the clamps -1-.
• Remove the Driver Assistance Systems Front Camera - R242- -2- in the direction of -arrow B- from the holder.
• Disconnect the connector -3-.

Installing 

Install in reverse order of removal and note the following:

• Calibrate the Driver Assistance Systems Front Camera - R242-. Refer to Suspension, Wheels, Steering (Driver Assistance Systems Front Camera; Driver Assistance Systems Front Camera, Calibrating).