LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2004 >> V40 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Central Electronic Module (CEM) - Vehicle Communication Information >> Vehicle Communication Information. Central Electronic Module (CEM) (2000-2004) >> Description of programmed data >> Automatic low beam
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic low beam

This parameter determines whether low beam will be on when the ignition is switched on and when the lighting switch is in position 0 and also within which range the instrument lighting can be adjusted using the control. The available range for the instrument lighting is fixed in percentage for each setting.

NOTE: This function is market dependent. Contact the dealer if uncertain about this function. Unless otherwise stated, automatic low beam is standard for the USA.

The following alternatives are available: 

NOTE: In Europe a new central electronic module was introduced in week 13 2003. The part number is 3063 8707 and 3063 8708. These control modules must be programmed with a range of 6-100% instead of 20-100%. Older control modules are still programmed with a range of 20-100%. The newer control module cannot be programmed with settings of a range of 20-100%. The older control module cannot be programmed with a range of 6-100%.
scientia non olet · About LEMON Manuals