Checking components and wiring
Diagnostic Trouble Code (DTC) CI-0C
Check the combined instrument panel and LPG control module connectors. Check for contact resistance and oxidation.
Check the signal cable between combined instrument panel terminal #B12 (#12) and LPG control module terminal #J1/04 (#4). Check for an open-circuit. Check for a short-circuit to supply voltage.
Diagnostic Trouble Code (DTC) CI-0D
Check the signal cable between combined instrument panel terminal #B12 (#12) and LPG control module terminal #J1/04 (#4). Check for a short-circuit to ground.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box
- To connect the breakout box to the LPG control module, see Connecting the breakout box to the LPG control module
- For information about signals, see Signal specification
- See Contents .
- Continue
Refer to Information