Checking components and wiring
Check that the resistance in the turbocharger (TC) control valve between terminals 1 and 2 is approximately 30 Ω at +20 °C.
Check the signal cable between engine control module (ECM) terminal 5 and turbocharger (TC) control valve terminal 2 for an intermittent open-circuit. Remedy according to Open-circuit, intermittent faults .
Check the power supply cable between turbocharger (TC) control valve terminal 1 and system relay (2/14) terminal 3 for an intermittent open-circuit and remedy according to Open-circuit, intermittent faults .
Other information
- To connect the breakout box, see Connecting the breakout box. EMS 2000 .
- Continue
Refer to Information