Checking the wiring

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Check the signal cable between engine control module (ECM) terminal 36 and DSA control module terminal 5 for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults
Remedy as necessary.
Other information:
- To connect the engine control module (ECM) breakout box, see Connecting the breakout box. EMS 2000
- For connecting DSA control module breakout box, see Connecting the breakout box. DSA
- For information about signals, see Signal specification .
Fig 2: DSA Control Module Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohmmeter
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying EMS2000
Courtesy of VOLVO CARS OF NORTH AMERICA.