Reading off parameters
NOTE:
The car should be driven to obtain the relevant values.
| No. | Parameter and status value | Remarks |
|---|---|---|
| 1 2 3 4 |
SP LF SP RF SP LR SP RR km/h |
Wheel speed left front wheel Wheel speed right front wheel Wheel speed left rear wheel Wheel speed right rear wheel Measurement range: 1.75-300 km/h The control module derives the wheel speed based on the signal from each wheel sensor |
| 5 | BRAKES ON/OFF |
Status of the stop (brake) lamp switch. OFF= The stop (brake) lamp switch is not activated ON= The stop (brake) lamp switch is activated The signal from the stop (brake) lamp switch is used so that the control module is in standby mode for ABS control during braking. |
| 6 | PUMP MOTOR ON/OFF |
Pump motor status OFF= The pump motor is not activated ON= The pump motor is activated |
| 7 | VALVE RELAY ON/OFF |
Status of the valve relay in the control module OFF= The valve relay is not activated ON= The valve relay is activated The inlet and outlet valves are supplied with voltage when the valve relay is activated. |