Checking the car configuration

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on
• Read off the car configuration from the central electronic module (CEM).

  Check that the all the car functions are in the list, e.g. type of brake system, four wheel drive etc. See the example below for cars with DSTC.

  Anti-lock brakes = ABS DSTC  .

  Fig 2: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the car equipment correspond to the car configuration? 

• YES 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NO 

  Refer to Checking the brake system