Checking the connectors

Check the central electronic module (CEM) connector. Check for contact resistance and oxidation according to Contact resistance and oxidation . Check for loose connections according to Loose connections (terminals) .

Check for any damage.

HINT: If the fault cause is found, reinstall the components, connectors etc. 

HINT: If the fault cause is not found, do not reinstall the central electronic module (CEM) before continuing with fault-tracing. 

Other information: 

• To access or replace the central electronic module (CEM) connector, see Central electronic module (CEM), replacing

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was a fault detected? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the cable