Checking the wiring and component
Check the signal cable between control module terminal #B44 (#B54) and air conditioning (A/C) relay terminal #4. Check for a short-circuit to supply voltage.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box
- To access or replace the control module for the S70 and V70 -2000, see Engine control module (ECM), replacing
- To access or replace the control module for the S60, S80 and V70 2000-, see Engine control module (ECM), replacing
- For information about signals, see Signal specification
- See Checking wiring and terminals .
- Continue
Refer to Verification