Checking the connectors
- Ignition off
- Remedy the connectors for the cable harness, sun roof control module and upper electronic module (UEM) for contact resistance and oxidation.
In particular, check for any damage
- Reinstall the components, reconnect the connectors etc.
- Ignition on.
Operate the sun roof.
Other information:
- To access the connector for the upper electronic module (UEM), see Interior lighting and upper electronic module (UEM), replacing
- To access the sun roof connector, see Control module, sun roof, replacing
- See Checking wiring and terminals .
Do the sun roof controls operate?
- YES
Refer to Verification
- NO