Checking The Component And Wiring

HINT: The fuel temperature sensor is integrated in the fuel pressure sensor. 

• Check the fuel pressure sensor connectors. Check for contact resistance and oxidation.

  Check the fuel pressure sensor between terminals #1 and #2 (sensor side). Check the resistance.

  Check signal cable for an open-circuit and short-circuit to supply voltage.

  Take readings between:

  • Engine Control Module (ECM) #A41 (#A41) and fuel pressure sensor #2.

  Check the ground lead. Check for an open-circuit.

  Take readings between:

  • Engine Control Module (ECM) #A15 (#A15) and fuel pressure sensor #1.

  Remedy as necessary.

  Other information: 

  • see CONNECTING THE BREAKOUT BOX
  • see SIGNAL SPECIFICATION
  • see COMPONENT SPECIFICATIONS
  • see PRESSURE SENSOR, FUEL RAIL (FRP)
  • see CHECKING WIRING AND TERMINALS
  Fig 1: Identifying 4-Bit Connector

  Courtesy of VOLVO CARS CORPORATION
  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION
  Fig 3: Identifying Fuel Pressure Sensor

  Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION