Installing The Spring Strut

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Install the spring strut in the body. Use new nuts and the new screw. See: TIGHTENING TORQUE .

Install the wheel spindle on the spring strut.

Remove: see 9997088 .

Install the 1 screw. Tighten. See: TIGHTENING TORQUE .

Remove the 1 nut from the ball joint. Press down the control arm. Use: see 9997076 .

Install:

the drive shaft
the 1 screw for the drive shaft. Tighten. See: TIGHTENING TORQUE
the ball joint in the wheel spindle. Use: see 9997076
the 1 nut for the ball joint. Use an Allen key as a counterhold. Tighten. See: TIGHTENING TORQUE .